Mosaik Commercial Cleaning cleans solar panels for EPCs, developers and owners on solar farm projects across Texas, including pre-commissioning and handoff cleans. Based in Amarillo, Mosaik takes on large solar projects statewide, from the Panhandle and West Texas to Abilene and Dallas-Fort Worth. Our crews bring the water to the site, follow the module manufacturer’s cleaning guidance, and are trained in OSHA safety and lockout/tagout procedures.
If you are building or handing over a utility-scale or commercial ground-mount array in Texas, here is what a construction-phase and handoff cleaning involves, how to plan for it, and what to ask before you hire a crew.
Why new solar farms need cleaning before handoff
Building a solar farm stirs up a lot of dirt. Grading, trenching, pile driving, road building and heavy equipment traffic all put dust in the air, and much of it settles on the modules that have already been installed. Packaging debris, mud splashed from rain and equipment, and dust from nearby fields add to it.
That buildup matters at the end of a project. Soiled panels make less power, because dirt on the glass blocks light from reaching the cells. A dirty array can also make it harder to read early performance data cleanly, and it does not make a good first impression when the owner or asset manager walks the site. A planned cleaning near the end of construction gives the array a clean starting point.
When to schedule cleaning on a solar construction project
The right timing depends on your schedule and your contract, but most projects look at cleaning at one or more of these points:
- After major earthwork and installation wrap up in a block or phase, once the heaviest dust-making work is done nearby.
- Before commissioning or performance testing, so testing runs on clean modules.
- Before substantial completion or handoff to the owner or operations team.
- After a dust storm or high-wind event that hits the site late in the project.
On large sites built in phases, it often makes sense to clean block by block as each section finishes, rather than waiting for the whole array. We can plan the sequence with your project team.
What Mosaik’s solar farm cleaning includes
Every project starts with a review of the site and the scope. Our solar panel cleaning service for construction projects and operating sites includes:
- Project and site review. We look at array layout, row spacing, access roads, phasing, soiling levels and your schedule before we quote.
- Cleaning matched to your modules. We use a method suited to your modules and mounting system and plan it around the manufacturer’s cleaning guidance.
- Water brought to the site. Mosaik brings the water for the job, so a remote site without its own supply is not a roadblock.
- Phased or block-by-block cleaning. Work sequenced to match how your project is completing.
- Pre-commissioning and handoff cleans. Timed to your testing and turnover dates.
- Ongoing programs after handoff. Recurring or event-based cleaning for owners and O&M providers once the site is operating.
Working safely on an active solar site
A solar site under construction is a busy, hazardous place. Some blocks may be energized while others are still being built, and inverters, combiner boxes and cabling carry real electrical hazards whenever the sun is up.
Mosaik’s crews are trained in OSHA safety and lockout/tagout procedures. On your project, we follow your site-specific safety plan, orientation and badging requirements, access rules and lockout/tagout procedures, and we stay inside the approved scope of work. We coordinate with your superintendent or site lead so cleaning does not get in the way of other trades.
Why water supply matters on Texas solar projects
Many Texas solar farms are built on open land far from town, and a new site often has no water connection at all. Figuring out where cleaning water will come from can hold up the work, especially late in a project when the schedule is tight.
Mosaik takes that off your list. Our crews bring the water to the site, so your team does not have to arrange a tap, a well connection or a separate water delivery for the cleaning.
Where Mosaik works in Texas
Mosaik Services Group is based in Amarillo and serves all of Texas. For large solar projects, we travel statewide, including the Texas Panhandle, Lubbock and the South Plains, West Texas, Abilene, and the Dallas-Fort Worth area. Solar farm cleaning is a good fit for:
- EPC contractors closing out a project
- Solar developers preparing a site for handoff
- Owners and asset managers
- Operations and maintenance (O&M) providers
- Commercial and industrial ground-mount sites
Questions to ask before you hire a solar cleaning crew
- Can you work to my project schedule? Ask how the crew handles phased completion and fixed commissioning dates.
- Who supplies the water? On a remote site, this decides whether the job can start on time.
- Will you follow the module manufacturer’s cleaning guidance? The answer should be yes, with a plan to show for it.
- How are your crews safety trained? OSHA and lockout/tagout training should be standard on an energized site.
- Can you stay on after handoff? A crew that knows the site can carry on with recurring cleaning for the owner.
Frequently asked questions
Who cleans solar panels on new solar farm projects in Texas?
Mosaik Commercial Cleaning, a division of Mosaik Services Group in Amarillo, cleans solar panels for EPCs, developers and owners on solar farm projects across Texas, including pre-commissioning and handoff cleans and ongoing programs after the site is operating.
When should panels be cleaned on a solar construction project?
Common points are after major earthwork and installation finish in a block, before commissioning or performance testing, and before handoff to the owner. Large sites are often cleaned block by block as each phase finishes.
Do we need water on site for solar panel cleaning?
No. Mosaik brings the water for the job, so your solar site does not need its own water supply for cleaning.
Does Mosaik travel outside the Texas Panhandle for solar projects?
Yes. Mosaik is based in Amarillo and serves all of Texas. For large solar projects we travel statewide, including West Texas, Lubbock, Abilene and Dallas-Fort Worth.
Are Mosaik’s crews trained to work on energized solar sites?
Yes. Mosaik’s crews are trained in OSHA safety and lockout/tagout procedures, and they follow your site-specific safety plan, access rules and lockout/tagout requirements.
How is solar farm cleaning priced?
Every quote is custom. Pricing depends on site size, array layout, access, how dirty the modules are, phasing and schedule. Email info@mosaikservicesgroup.com or use our contact page to request a project review.
Plan your solar farm cleaning
Whether you need a pre-commissioning clean, a handoff clean or a long-term cleaning program, Mosaik Commercial Cleaning can build a plan around your Texas solar project. Learn more about our solar panel cleaning service, see all of our commercial cleaning services, or contact us to talk through your project. You can also email info@mosaikservicesgroup.com.
Mosaik Services Group brings six divisions under one roof: Commercial Cleaning, Pest Control, IT Solutions, Lawn Care, Marketing & Media, and Workforce Solutions. One call connects you to all of them.
One Group. Multiple Solutions. Strength in Service.